Pre-wired T-type 4-Way Wiring Harness - CTS Pots - 0.047 uF with your choice of Caps - FREE COPPER SHIELDING
Regular price
$61.00 USD
Regular price
Sale price
$61.00 USD
Unit price
per
Pre-wired T-type 4-Way Switch Wiring Harness - CTS Pots - 0.047 uF with your choice of Caps - FREE COPPER SHIELDING
Assembled and soldered in Nova Scotia, Canada using top components. Perfect for a drop-in retrofit your old wiring or upgrading your current setup. Save time and money with this harness.
Made from quality components:
- CTS 250k-ohm potentiometers with audio taper that fit 3/8” hole. Pots have split shafts with 24 spline, perfect for S-style knobs
- Your choice of either Sprague Orange Drop, Mallory 150 Series or USSR NOS 5% (from Ukraine) Capacitor in 0.047 uF
- Oak Grigsby 4-way switch with the following positions: 1- Bridge only, 2- Bridge and Neck in parallel, 3- Neck only, 4- Bridge and Neck in SERIES
- Option of Volume Treble-bleed mod: 0.001 uF cap in series with a 150 KOhm resistor
- Tone is for both Neck and Bridge pickup
- 1/4” Switchcraft #11 jack
- Vintage-style cloth-covered wire with 10” leads to the jack and bridge claw ground
- 60/40 Solder is used for all connections
- Your harness will be mounted on a 1/8” MDF sheet, ready to drop in and with the right orientation
- You get a free Canadian dime! It comes with the Bluenose on it
FREE Copper Shielding Tape:
You get 66” of 1” wide adhesive-backed copper shielding for your pickup cavity
Installation How-to:
You’ll need to solder the lead and ground from each pickup to the switch according to the included instructions. I have laid a bit of solder on the pot for you to use the right spot. I cannot do all the work, Skipper! It’s simple and easy and makes installation a breeze.